Music Theory De-mystified BlogMajor

10. How To Find The Notes Of A Scale

This post is one of a 2-part series of free basic music theory lessons on my blog, musictheoryde-mystified.com. You can see the complete list here. Please feel welcome to make a comment or ask a question.

In a hurry? You can scroll down straight to the summary (but you’ll miss all the fun…)

A scale is the combination of a root note and a mode. It’s even named that way. C major means C is the root note and major (Ionian) is the mode. The same for A minor: A is the root note and minor (Aeolian) is the mode.

In 8. What Is A Scale? we saw that a scale is a selection of (typically 7) notes within an octave, and that our sense of tonality depends on knowing which of these notes is the root note. In a piece that has a clear tonality the notes are organised so that the root note (tonic) is highlighted, especially near the beginning and end.

We also discovered that the reason the root note is so important in allowing us to hear the musical character is because typical Western scales have uneven intervals from note to note. Changing the root note effectively changes the pattern, changing the mode and thus its character.

Scales On Different Root Notes

If you know the character of the mode, you can sing a scale in that mode. As long as it’s within your range, you can sing that scale starting on any note (without even knowing what that note is!). As long as you don’t change the mode it will sound the same, just higher or lower.

The same is true for writing music. You can write a scale on any note. Here’s how it works:

Let’s look at the the major mode, which naturally starts on C. C major is made up of only the naturals.

We can pick any other note as the root note and build a major scale on that. All we need to do is make sure we stick to the major mode, the pattern of intervals from note to note that matches C major, or else we’ll change its character.

Let’s say we want D major. If we just started on D and used the same notes we would have a different pattern of intervals – a different mode – a different character.

It would sound like this:

This scale has quite a different character to C major.

Instead, we use the same pattern of intervals as C major, write D as the root note and then, working from left to right, count the number of semitones from each note to the next to work out the other notes. This will involve using one or more sharps or flats.

The 2nd note should be 2 semitones higher. 2 semitones above D is E.
The 3rd note is 2 semitones higher than E. F is 1 semitone higher than E and G is 3 semitones higher so we want the note in between. This could either be called F# (F+1) or Gb (G-1). What should we call it? We’ll come back to that shortly. We can put in both for now.
The 4th note is just 1 semitone further which is plain old G, and so on until the 7th note, 2 semitones above the 6th note, B. Again we have 2 options, C# or Db, and again we’ll write in both for now.
And, of course, the 8th note, 1 semitone above the 7th, should be exactly the same as the first, as it is the octave.

OK, time to look at what we’ve got… If we choose Gb for the 3rd note we have Gb AND G but no F, whereas if we call the 3rd note F# we have one F and one G. The same goes for the 7th note: Db uses the same name as the root note but a different sign, whereas C# allows one C and one D.

Now that we’ve worked out the notes in D major, let’s have a listen.

Now compare it to C major. The character should be the same, even though one scale is a little higher than the other…

The Note Naming Rule

For scales, there is one simple rule: the next note in a scale should have the next letter in its name.

Each note in a scale must have its own letter.

There’s a good reason for this: there are 7 note names, 7 notes in a scale and 7 pitch positions per octave on a stave.

Music notation is very visual. We can see the notes climb and descend as the melody itself climbs and descends. As we can see from the two versions of D major below, if two different notes in a scale share the same note name there are two different pitches sharing the same place on the stave and needing constant accidentals (sharps/flats/naturals) to show which is which. There is also one unused position, leaving a gap in the visual that we don’t hear.

Below is D major as notes on a stave showing both sets of note naming options. Try to read the notes while you listen. Which one is more visual (and less cluttered)?

Note: We can make a scale look even less cluttered by using a key signature. We’ll look at key signatures in the next lesson.

How to find the notes of a scale

Now that we know how to work out what notes we need to write a major scale starting on D instead of C, we can do so for any mode and any root note.

As the most common modes are major and minor, let’s find the notes for some other major and minor scales.

Choose a mode, e.g. major or minor.
Write the note that you want to build the scale on as the 1st note (root note).
Working from left to right, count how many semitones to the next note. Where there are two names for the same note, choose the name using the letter after the previous note.
(safety check: if you’ve added it up right, the 8th note’s name should be exactly the same as the first).

TIP: Learn the patterns that make up the major and minor modes (I think of them as phone numbers).

Major .2.2.1.2.2.2.1.

Minor .2.1.2.2.1.2.2.

Example: D minor

Have a go…

Here’s the answer…

OK, this one’s minor and has a flat. Pure fluke! There is no connection between being major or minor and having sharps or flats.

Try These…

Grab some paper and a pencil and try a few more… Bb major, A major, C minor, F# minor.

Answers at the bottom of this post. Here’s what a blank major and minor look like:

Practical Tip

Pick a major or minor scale that’s easy to play on your instrument, find its notes and doodle around with those notes. Just in one octave will do for a start, then try 2 octaves worth – it’s more fun. As long as you highlight the root note every now and again, for instance by making it long or strong, you should be able to feel the tonality of the mode you’ve chosen, or at least keep coming back to it if the music goes elsewhere. For a bit more on how to highlight the root note, visit How Can We Tell What Key We’re In?

Summary

A scale is a combination of a root note and a mode.
The root note is the first note of the mode.
A mode is a set of (usually 1 and 2 semitone) intervals from note to note adding up to an octave. The most common modes are major and minor. Of these, only C major and A minor have no sharps or flats.
Due to the irregular pattern of intervals from note to note, each mode has a unique musical character.
To make a scale on a different root note, choose the mode with the character that you want, e.g. major or minor, and write in the note you want to be the root note.
To find names for the other notes, start with the root note and count 1 or 2 semitones to the next note, according to the mode. Write the 2nd note in, count semitones to the 3rd note and so on, all the way to the octave.
Each note of a scale should have its own letter. Work from left to right, using the next letter each time, as you go.

This post is one of a growing series of free basic music theory lessons on my blog, musictheoryde-mystified.com. You can see the complete list here.

Please feel welcome to like, comment or to share this post. If you have any questions, pleased leave them as a comment and I will respond as soon as I can. If you enjoy my posts and would like to be kept up to date, please subscribe.

NEXT LESSON: 11. Introduction To Keys and Key Signatures: Major Keys

PART 1 CONTENTS: Basic Music Theory Course Contents

Answers

Bb C D Eb F G A Bb

A B C# D E F# G# A

C D Eb F G Ab Bb C

F# G# A B C# D E F#

8. What Is A Scale?

If you’re looking for the quick answer, scroll down to the summary.

A scale is both a sequence of note pitches you can play by itself as a simple melody (usually for practice) and the basis of a piece of music.

In 1 Note Names, Semitones and Octaves, we saw that there are 12 different musical note pitches within an octave, each 1 semitone apart. We also saw that there are only 7 letters used to name music. On a musical stave there are also only 7 pitch positions per octave, one for each letter.

This is because most music in Western culture is usually made up using only 7 of the 12 notes at a time, the eighth note being the octave (hence the name “octave”). Such a selection of notes is called a scale. The first note of a scale is the reference note for music written in that scale.

Note: It is possible for a scale to have more or less than 7 notes (such as the 5-note pentatonic blues scale) but the vast majority of music in Western culture, both historically and in modern times, is based on 7-note (heptatonic) scales.

How Far Apart Are Scale Notes?

For 7 notes to make up an octave (12 semitones), the notes can’t all be spaced evenly. Most of the notes are 2 semitones apart, but there are two pairs which are only 1 semitone apart. For example, let’s look at the naturals; the notes that have just a letter as their name.

The naturals from A to A with note spacing in semitones

C major

Although the notes are named starting on A, C is the starting point for the most common scale of all, C major. We’ll talk about major and minor shortly, but for now, let’s look at the notes starting on C.

The naturals from C to C with note spacing in semitones

C major is made up of the naturals starting on C. We can see that C to D is 2 semitones, as is D to E, then E to F is only 1 semitone, etc. This is quite easy to see on a piano keyboard, as the named notes are the white keys and the others, the black keys. The interval from one key to the next is 1 semitone, whether between adjacent white keys or between a white key and an adjacent black key. (The staggered layout of a piano’s keys is for practical reasons- so one hand can span an octave).

Note: In scales, the intervals marked as 2 semitones are usually called a “tone” rather than “2 semitones”. Other schools use the terms ”steps” and ”half-steps” for the 2- and 1-semitone intervals between the notes of a scale.

In this blog I will always name intervals by semitones or by their musical interval name. For my reasons, see A Story Of Tones And Semitones.

The Root Note

When we play a scale, we usually emphasise the first and last note, in this case, C, by playing those notes louder, longer or both. Playing a scale in this way helps us feel that the starting/ending note is the home note and that the other notes either lead away from that note or towards it.

The first note of a scale is called the root note or tonic and it is the most important note in a scale. The root note represents home in a musical journey and the start of the pattern of intervals from note to note that defines the scale.

Modes

Let’s play a scale using only the naturals, from C to C and back.

Now let’s play the same notes but starting on a different root note, such as A. We’ll play A to A and back.

Sure, one was slightly higher than the other, but did you notice a difference in character/flavour/mood? Have another listen…

… (I’ll wait)…

This difference in character is even more noticeable in a real piece than just a scale.

Now let’s compare the spacing of the notes.

Notice the difference in the order of the 2’s and 1’s in relation to the root note? It is this pattern that determines the scale’s character.

The pattern of intervals that determine the note spacing of a scale is called a mode. When using just the naturals, each time we start on a different note, the pattern of note spacing is different. There are 7 different naturals, each of which is the root note of a mode. Of the 7 modes produced, six are quite common in various genres and one, the one starting on B, is seldom used (but that’s the subject of another post).

Earlier on, I called the first scale, starting on C, C major. The term major refers to the mode. Major is the most commonly used mode in modern Western music, hence the name. The one on A is called A natural minor or just A minor for short. Minor scales are usually used in a slightly different way to major in that there are two popular variations on the natural minor. We’ll look at how these variations are used in part 2 of this course so for now we’ll use the natural minor as our minor example.

The major and natural minor modes are also known by Greek names based on modes in the renaissance era.
Major = Ionian mode. Natural minor = Aeolian mode.

What About Keys?

You’re more likely to hear people talk in terms of keys rather than scales and modes. A key is simply the notes of a scale when they are rearranged to make music.

For instance, any music which is based on the scale of C major is in the key of C major.

The major or minor (or any mode, for that matter) can be made to start on any root note. The major mode on D is called D major. The minor mode on F is called F minor. We’ll look at how this works in coming posts..

Scales and melodies

We can tell the difference between C major and A minor when we play the scale because we’re emphasising the root note – by playing it first, last and longer than the other notes. Furthermore we can hear the progression of ascending or descending notes arrive on the root note. But how can we recognise the mode when the notes are all mixed up in a melody?

It’s all about being able to recognise the root note.

Melodies rely on a range of techniques to highlight the root note including those I’ve just mentioned. A melody isn’t a random selection of notes. The structure of the phrases that make up a melody and the relative length and strength of notes all contribute to our ability to recognise the root note as home. Some of these techniques are mentioned in a little more detail in How Can We Tell Which Key We’re In?

Summary

A scale is a selection of (usually 7) pitches within an octave, which form the basic pitch elements of a piece. The notes can be played at any octave.
The root note or tonic is the first note of the scale and the reference/ home note for music written using that scale.
The interval spacing of the notes of a scale is called a mode. The most common modes are called major and minor.
Each mode imparts a unique character to the music because of its unique combination of 1 and 2 semitone intervals from note to note.
We can hear the character of the mode because the music is written in such a way as to highlight the root note. For some examples, visit How Can We Tell Which Key We’re In?

This post is one of a growing series of free basic music theory lessons on my blog, musictheoryde-mystified.com. You can see the complete list here.

Much of the content is based on my upcoming music theory reference, Music Theory De-mystified, which is currently planned for release as an e-book by the end of 2023.

NEXT LESSON: 9. Accidentals, Sharpen and Flatten

PART 1 CONTENTS: Basic Music Theory Course Contents

F flat Is a Note

This post is one of a growing series of holistic investigations into various aspects of music theory. The full list can be found in the Posts page under the category Music Theory De-Mystified.

All comments are welcome. If you enjoy my post, please give it a like and share it or subscribe to my blog.

Most notes have at least two possible names. For example, F# is the same pitch as Gb. Even naturals have alternative names. E could be called Fb and F could be called E#. And that’s not to mention double sharps and double flats. G could be called Abb and so on.

Why so many choices? First, some background…

Modes

Major and minor keys are based on patterns of 2 and 1 semitone intervals between consecutive notes. We call such a pattern a mode. The series of notes generated by the mode is called a scale. Typical Western scales have 7 notes per octave, the eighth note being the octave of the first (hence the name “octave”).

The starting note of the scale is called the root note or tonic. The root note is easy to recognise when playing a scale because it is first and last. Melodies make the root note apparent by highlighting it in various ways so we can tell which mode we’re in when we listen to the music.

The choice of mode imparts an overall character to the music, called tonality.

Keys

A key is the combination of a mode and a root note. Keys allow us to choose the mode and the root note independently.

Let’s look at the major mode as an example. The original major, made up of only naturals, is C major. The name C major indicates that this key uses the major mode with C as the root note.

Any other major key needs at least one sharp or flat. By starting the mode on a different root note we need some different notes in the key to preserve the pattern of intervals from note to note. The pattern of intervals defines the mode, in this case, major.

We can work out the notes needed for a chosen key by placing the new root note at the start of the pattern and counting the semitones from note to note. Let’s look at D major; the major mode starting on D.

The note naming rule

There is one simple rule that determines the right choice of note name. In a standard Western mode such as major or minor, each scale note must have its own letter.

The letters indicate consecutive scale notes, just like they are written on a stave. A musical stave only has positions for notes as letters: sharps and flats are written as symbols beside the note.

When we work out the note names for a key, we start from the root note and count up. As we go, each following note must use the next letter as its name. In the example above, D major, the 3rd note is called F#. Gb is the wrong name because the third letter up from D is F, not G.

B#, Cb, E# and Fb

Remember BCEF? (see my beginner’s tip). This is the extreme end of BCEF. These notes look like they should never be used because they have equivalent pitches which are just naturals. B# = C, Cb = B, E# = F and Fb = E, so why use them? In truth their use isn’t all that common, but they do get used in certain keys.

For example, B# is used in C# major and Fb is used in Cb major.

This potentially begs the question, why use C# major as the name of a key when it could be called Db major? C# major has 7 sharps whereas Db major has only(?) 5 flats…

A valid question. I can’t answer it comprehensively in this post but there are three main reasons:

ease of playing/reading on a given instrument
movement within the piece from the home key to other keys
altered notes in the melody or chords

Easy keys

Players of some instruments such as guitar find sharps keys easier to read and play. Brass players, on the other hand, prefer flats keys. It depends on the base key and playing logic of the instrument.

Singers can be very specific about their choice of key for a particular song based on how the melody suits the different registers of the singer’s voice. This may force the rest of the ensemble to play in a key which is awkward to read, whichever name they choose.

For example, F# major has 6 sharps and Gb major has 6 flats. F# major has the note E# and Gb major has Cb.

Keys within a key

Typically a melody starts in the home key and goes on a journey. This journey takes it through various, usually related, keys, some of which are fleeting moments in the journey while others are visiting points; temporary homes. Campsites, if you like.

Visiting keys are named according to how closely related they are to the home key: in other words, how many notes they have in common. In general, if we start in sharps we continue in sharps, and the same for flats.

For example, in E major, a major key 2 semitones up would be called F# major, not Gb major. This is because F# is a note in the home key (E major) and Gb is not. In fact, none of the note names in Gb major are used in E major.

Which keys are related to which? That’s for another post.

Altered notes: weird note names in normal keys

Sometimes a melody or chord uses a note that doesn’t belong to the key. This could be as a variation or ornament, or the melody just might not be in a conventional mode.

We think of such a note as a replacement of the normal scale note or chord note. The context of the music determines which scale note has been replaced. To preserve the note naming rule, the new note is named with the same letter as the note it replaces.

if the altered note is a semitone higher than the scale note it is sharpened
if the altered note is a semitone lower than the scale note it is flattened

Sharpening or flattening allows the music notation to reflect which scale note is being altered, just as we would hear when playing and listening. However, depending on the key of the piece, this may require a double sharp or double flat.

NOTE: To avoid too much rambling I have only given a brief outline of the various topics raised in this post. I hope to cover some of these in future posts.

Please feel welcome to share this post, make a comment or ask a question.

Graphics taken from The Tiny Music Theory Book, a short, easy to read guide to the essentials of music theory and notation, available here.