Music Theory De-mystified Blogbpm

This post is one of a 2-part series of free basic music theory lessons on my blog, musictheoryde-mystified.com. You can see the complete list here. Please feel welcome to make a comment or ask a question.

Note Length

In 3. Beats, Tempo And Timing we saw that the length of a note is counted in beats, and that the length of a beat is determined by the tempo. For instance, when the tempo is 60 bpm (beats per minute), 1 beat is 1 second long: for a tempo of 120 bpm, 1 beat is 1/2 second long. Notes can be any length, from a number of beats to a fraction of a beat.

Note Values

Although we count in beats, not all notes are a beat, or even a whole number of beats, in length. Some are longer, some shorter.

The symbols for note length are called note values. How we interpret these symbols depends on the time signature. Time signatures are a subject for a later post, but let me say for now that the most popular time signature, common time, as well as several others, use the crotchet (quarter note) to represent one beat. For the rest of this post I will refer to a crotchet as 1 beat.

Tempo markings often include the note value which represents 1 beat. When a crotchet = 1 beat, a tempo of 60 bpm is indicated as follows:

60 crotchet beats per minute

Funny Names

There is both an English and an American name for each note value. The American name is a fraction based on a whole note equaling the number 1 (1 = whole). The next shorter shorter note is half its length and is called a half note, etc. The “1” refers to 1 bar in the most common time signature of all, 4/4, which has 4 beats per bar.

The English names are old-fashioned names meaning various degrees of “short”, harking back to the original Medieval runes and the gradual evolution of note symbols since.

On the whole I will be using the English names to avoid confusion between a half note and half a beat, etc. However, I recommend learning the American names as well: note values as fractions are the key to interpreting time signatures. In the table below, I have listed both names.

Table of Note Values

The following table lists the most common note values from longest to shortest. The “Usual Length” column shows the length in beats in common time.

Regardless of time signature, the note values are always proportional to each other. Each note value in the table always equals two of the note value below it. A semibreve = 2 minims, a minim = 2 crotchets etc.

The longest note value is called a semibreve because originally there was an even longer note, the breve. The breve is seldom used these days because, at 8 beats long, most time signatures don’t have bars long enough to be able to fit a breve within a bar.

Don’t be daunted by all these symbols. Just focus on the note values that are 1 beat or longer to start with; the ones bordered in green. It’s much easier to add beats together to play longer notes than to divide a beat into halves or quarters. Later you can include quavers, and eventually, semiquavers. Demisemiquavers are much less common.

Stem direction

All but the longest note values have a stem. The stems in the above tables are shown as extending upward from the notehead.

In 2. Notes On a Stave: Pitch we saw that on a stave, the stem’s position and direction depends on where the notehead sits on the stave.

Notes which are on or above the middle line of the stave have their stems on the left of the notehead, extending down.
Notes below the middle line of the stave have their stems on the right of the notehead, extending up.

Tails and beams are always at the outer end of the stem.

Tails and Beams

Notes shorter than a crotchet have a tail. The shorter the note, the more lines make up the tail. When there are several short notes in succession, their tails are joined together to form a beam. Beams generally join the notes in 1-beat groups such as 2 quavers, 4 semiquavers etc. This allows us to see which notes are on the beats, making the music easier to follow. It’s also a cleaner, less cluttered look.

The exception is quavers/ eighth notes, which can be joined together in one-, two- or even three-beat groups.

Below is an example of the different note values, with the shorter notes beamed in groups. In this example the quavers are beamed in groups of 2 beats (4 quavers).

The vertical lines, called barlines, occur every 4 beats, as in the time signature 4/4. In 4/4, a semibreve lasts for 1 bar.

As you listen, you will hear a metronome tick at 80 bpm and repeated notes of the different note values played over it. The use of different note pitches is just for listening convenience.

Notice that the demisemiquavers have only their outer tail beamed in whole beats: the inner tails are beamed in half-beats. This is a popular convention for an even cleaner look but not necessary. Some publishers beam all demisemiquaver tails in whole beats.

Dotted Notes

A note can be any length. For example, we may want a note to last for 3 beats rather than 2 or 4 beats. One option is to use a dotted note.

Each note value can have a dot beside it, to the right. The dot adds half the length of the note value: the dotted note is one and a half times the length of the note without the dot. Effectively, the dot represents the note value directly below the note in the note value table above. For example, a dotted minim (3 beats) = a minim (2 beats) plus a crotchet (1 beat).

The best way to get used to note values is to try to play some written music; notation means nothing until you try to play what you see. Start with something simple such as a children’s song or a melody that you’re very familiar with. If that seems too difficult, please visit my earlier post, 3. Beats, Tempo and Timing, which has some simple timing exercises that might provide a good starting point.

For more, see 7. Rest Values, How To Count Rests. In upcoming posts I hope to provide more information on note length, time signatures and rhythm.

Please feel welcome to like, comment or to share this post. If you have any questions, pleased leave them as a comment and I will respond as soon as I can. If you enjoy my posts and would like to be kept up to date, please subscribe.

The movie is taken from Music Theory De-mystified, my upcoming music theory e-book, due to be released in 2023.

NEXT LESSON: 6. Time Signatures 1 – Simple Time

PART 1 CONTENTS: Basic Music Theory Course Contents

Beats and note length

Music is made up of notes and rests of varying length. The musical unit of note length is the beat.

Beats

The duration of a note or rest isn’t written in absolute time: we don’t say a note is 3 seconds or half a second long. Instead, we say it is 3 beats long or half a beat long. We use symbols to indicate the length of a note as a number of beats or a fraction of a beat. For more on the symbols for note length, please see 5. How Long Is A Note? Note Values 1

Tempo

How long a beat lasts depends on the tempo. Think of a clock that doesn’t just tick every second, but that has a dial that lets you set the tick to any speed you like (this actually exists, both as a mechanical ticker and as an app: it’s called a metronome). The speed of the ticking is the tempo. Tempo is measured in beats per minute or bpm.

Each tick represents the start of one beat, so a note that is one beat long and starts on a tick will last until the next tick.

Timing

Notes can start on a beat or between beats. The relationship between the actual notes of a part and the tempo is called timing. Being able to accurately play the note lengths in relation to the tempo is called playing in time.

Timing is also the basis of how musicians can play together in a co-ordinated way. Large ensembles often use a conductor for this purpose. The conductor acts as a human metronome, using gestures to indicate the beats and thus control the tempo.

The tempo of a song is often constant, especially in many modern genres, but it is also possible for the tempo to change within a piece.

Counting the beat

The standard metronome has a range of 40-208 bpm, which roughly parallels the range of human heart rates. This represents our range of experience of what feels like a beat. For example, try counting “1, 2, 3, 4” or “1, 2, 3” along to metronome ticks of various tempi.

Slower than about 40 bpm we can’t “join the dots”; we don’t feel the link from one beat to the next clearly enough to be able to count steadily and we’re tempted to insert the word “and” between counts: of course, this effectively doubles our counting speed, even though we’re using a different word.

Faster than about 200 bpm it becomes hard to feel each count as a proper beat: more like a half-beat: and we want to count every 2nd beat instead.

Some music isn’t played in any set tempo, but a kind of flexi-time. This is formally called rubato but the English word freely can be used instead if you prefer. Rubato is prominent in operatic arias and other “story-telling” genres such as ballads.

Musicianship: the bridge between theory and practice

Often music is thought of as two subjects, theory and practical: the reading and understanding of musical language and learning to play an instrument. There is an important third element called musicianship. Think of musicianship as practical theory, general musical skills independent of the instrument you play.

One aspect of musicianship is timing. Aspiring musicians need to master some basic skills such as being able to play to an external beat, be it from a metronome or other players. Some people have a natural ability to feel the beat, while others need some exercises to develop this ability.

Basic timing practice

The following examples use two note symbols. The first is called a crotchet or quarter note: here it represents a length of 1 beat. The second is called a quaver or eighth note and represents half a beat. More on note length in a later post.

I have already mentioned the first step, the ability to count or play a note steadily to a beat at various tempi. Try counting “1, 2” first, then playing. You can play any note: often it’s easier to play two different notes, depending on your instrument.

If you had trouble counting to the beat as above, practice at a medium tempo such as 90bpm first as it’s neither too slow to feel nor too fast to play.

TIP: Listen to the metronome first before starting to count or play. Let yourself feel the tempo for as long as you like: it’ll be much easier to play in time.

A variation of the above exercise is to tap your foot at a set tempo and play together with your taps.

The next step is to be able to divide a beat into halves. It may help to use the word “and”, at least mentally, to mark the half beats. This makes it feel like you’re counting twice as often, which is certainly easier for slower tempi. The trick is to make sure the halves occur exactly halfway between the beats: at first, they may be uneven. Try playing along to the example below.

Gradually increase the tempo until you can play quite fast.

Once you can play steadily every half beat at a faster tempo such as 120bpm as above, try leaving out the “and”s in your count.

It may take a little while to be able to keep up the steady rhythm of even halves. The more you practice, the more stamina you develop and the longer you can keep the halves even. After a while you’ll wonder how it could ever have been difficult…

Other simple rhythms are also worth learning, such as alternating a whole beat and two half beats or playing only the off-beat halves (the “ands”). This latter is the basis of syncopation (more on this in another post). It’s also worth learning to divide a beat into uneven pairs, long then short, called swing or swung eighths. Effectively, the long note is 2/3 of a beat and the short note, 1/3 of a beat. Another good exercise is to divide the beat into thirds, 3 equal parts.

The above exercises form the basis of many common rhythms.

More timing practice

Playing in time is one of the critical skills required when playing in an ensemble, whether a duo, band, choir or orchestra. Complete musicianship teaching methods are available, covering timing, rhythm, pitching intervals and more.

In my upcoming music theory book, Music Theory De-mystified, I have included two chapters on musicianship. The timing exercises above are taken from one of these chapters. The other chapter is about learning to recognise intervals (the pitch relationship between two notes) by being able to sing or play them.

This post is one of a growing series of free basic music theory lessons on my blog, musictheoryde-mystified.com. You can see the complete list here.

Substantial parts of this post, including the movies above, are taken from Music Theory De-mystified, my upcoming music theory e-book, due to be released late 2023.

NEXT LESSON: 4. Bars, How To Count In Bars And Beats

PART 1 CONTENTS: Basic Music Theory Course Contents